Reliability – performance – service
These are the three key areas to evaluate when upgrading explosives detection systems (EDS) from single or multi-view X-ray to computed tomography (CT) technology. This is a costly, long-term investment so it is critical to make informed decisions and choices – and there is a difference between marketing positioning and field-tested results.
For example, what about fixed versus rotating data acquisition (also referred to as fixed or rotating gantry). Mechanical rotation is a mature technology which has been used in medical applications for over 20 years. Significant advances in bearing design have increased equipment lifespan far beyond the replacement cycles typically found in security screening. Static gantry supporters will often highlight vibration issues in rotating gantries but this does not prove a key issue in the field. In fact, rotating gantries with a single X-ray source have been proven to deliver a much higher level availability and reliability than static systems.
Let’s elaborate on the comparison.
One light source vs many
In rotating gantry CT EDS systems, a single X-ray tube, detector arrays and the power supplies are rotated around the object to produce the CT image. The X-ray tube is essentially a high-powered light bulb emitting photons as X-rays, rather than as visible light.
To create CT imagery, a fixed gantry CT EDS generates a fan beam of X-rays using multiple X-ray sources (“sparse view”); or a much more complicated X-ray with hundreds or even thousands of source points (“many view”). This design increases complexity and adds X-ray tubes in order to simulate what can be achieved by rotating a single tube. In addition, the fixed construction makes changes or future upgrades challenging.
The problem with X-ray tubes
From an engineering perspective, the most troublesome aspect of any X-ray screening system is the X-ray tube itself. The components with the highest failure rates in CT EDS systems tend to be associated with X-rays (tubes, as well as the detectors and power supplies). However, this is not related to whether the gantry is fixed or rotating, but due to high use during continuous screening operations averaging 20+ hours per day. This becomes a problem for fixed gantries as they rely on dozens (and in some cases hundreds of tubes) which can potentially fail – versus a rotating system which relies on just one tube.
Ask the right questions
In the end, the best way to make a decision is to go on-site and ask questions. Go and see systems which have been operating in a live environment over a period of time and request data on performance, uptime and failure points. Ask if the machines can be serviced in the field. When a system goes down, how long will it be out of operation? Are spare parts available on-site or nearby? What is the response time for the supplier’s trained technicians and service personnel?
With all the relevant information to hand, you will be ready to make informed choices for your particular operation and will have a system which should last for 15 years or more.